Teleprompter on Mac: How to Set It Up and Record With Your iPhone Camera

Why Mac is different from iPhone and iPad for teleprompter use

Recording on Mac is a fundamentally different physical experience than recording on an iPhone or iPad. When you shoot on iPhone, the camera moves with you — you can angle it, tilt it, hold it at arm's length. When you record on Mac, the camera is fixed. The FaceTime camera sits above the display at a set height, typically 50 to 80 centimeters from your face. You are not going to reposition it.

That constraint actually works in your favor for teleprompter use. Because the camera position is predictable and your sitting distance is consistent, you can dial in your text area position once and it stays right. The script sits in the upper portion of the screen — close to that FaceTime camera dot — and your eyes travel a short, repeatable path between the words and the lens.

Mac recording also handles a different type of content than mobile. You are not shooting 60-second Instagram clips at your desk. You are recording full-length YouTube tutorials, 20-minute course modules, webinar segments, or multi-section explainer videos. Scripts run longer. Sessions run longer. That means scroll speed calibration and text readability matter more — a setup that feels fine for two minutes starts showing its problems at minute eight.

The other difference is context. On Mac, the teleprompter is almost always sharing the screen with other apps: Zoom, OBS, StreamYard, QuickTime, your browser. The teleprompter has to either integrate cleanly with that environment (Prompter mode) or take over the camera entirely (Camera mode). Knowing which mode to use in each situation is the core skill this guide teaches.

Mac teleprompter use is defined by a fixed camera position, longer recording sessions, and the need to share the screen with other recording tools. Getting those three factors right is what separates a setup that feels natural from one that produces robotic-looking footage.

Teleprompter for Mac: Zoom calls, interviews, and presentations

Prompter mode is the feature that makes a teleprompter for Mac genuinely useful for calls — not just desk recording. In Prompter mode, the app displays your scrolling script without activating the Mac camera. Zoom, Google Meet, Teams, or any other call tool continues using the webcam normally. You read from the script; the other person sees you looking at the camera.

For calls, webinars, and screen recordings, open the floating window. It's a small script window that stays on top of every other app — Zoom, Teams, Google Meet in the browser, Loom, OBS, Keynote, or PowerPoint — including full-screen apps and other desktops. Drag it right under the webcam and resize it to a few lines. It leaves focus with the app you're using, so you can unmute, share your screen, or advance slides while the script keeps scrolling, and its play/pause and previous/next section buttons stay in sync with the main app window. Opened from Camera mode, the floating window also shows your camera preview and lets you start and stop a recording with a countdown; opened from Voice mode, it records audio.

This setup handles several situations that iPhone and iPad cannot replicate cleanly. Run Prompter mode alongside Zoom for talking-point cards before a client call, bullet points during a live panel, or a full script for an investor pitch you cannot afford to fumble. For media interviews where you are on camera but reading pre-prepared answers, the floating window keeps the text in a resizable strip you can position near your webcam. For a broader look at how teleprompter overlays work across all video call platforms, see the guide to teleprompter overlays for video calls.

Let the script scroll at the speed you set and nudge it with the up and down buttons, or, in Prompter mode, turn on voice commands — "next," "pause," "previous" in English — to move through the script hands-free. On Mac you can pick the voice command language in Settings, so the commands follow the language you speak. Voice commands are especially useful during podcast recordings and webinars where your hands are occupied with slides or screen sharing.

For online workshops and presentations, Prompter mode turns your Mac into a proper cue card system. A host can run through a 45-minute workshop with the full script scrolling at eye level, maintaining eye contact with the camera throughout. No printed notes, no tab-switching, no missed transitions.

• Zoom calls and video meetings: Floating window on top of the call, positioned right under the webcam.
• Media and investor interviews: Manual scroll or voice commands for prepared answers.
• Online workshops and webinars: Full script scroll during live sessions, hands-free navigation.
• Speech and pitch rehearsal: Prompter mode for practice runs before the real call.

Check the FAQ page for common questions about running Prompter mode alongside third-party call software.

Mac teleprompter setup for desk recording and YouTube videos

Camera mode is what you use when the Mac itself is the recording device. The app activates the built-in FaceTime camera, displays a live preview, and overlays the scrolling script on top. You record a video file directly inside Teleprompter-Scrolling Scripts. No QuickTime, no external camera app, no second window to manage.

The most important setup decision in Camera mode is where you place the text area. The FaceTime camera is at the very top center of the display. Put the text area in the upper center of the screen, close to that camera dot, and your eye movement between the script and the lens becomes nearly invisible to viewers. Move the text area to the bottom or sides and you will see the gaze shift in the footage.

Text area width matters too. Full-width text forces your eyes to travel left to right across a wide field — the same problem news anchors have with poorly set teleprompter copy. Use a narrow column of two to three lines, centered at the top of the screen. Your eyes stay in a small zone near the camera.

Font size depends on your actual sitting distance, not a default setting. At standard desk distance (roughly 60cm), 48pt is a reasonable starting point. Adjust up if you find yourself leaning forward to read, adjust down if the text feels like it is shouting.

Scroll speed calibration is where most new users spend too little time. Set the speed slightly slower than your natural speaking pace, then rehearse the first 30 seconds. If you feel rushed, slow it down. If you feel like you are waiting for the next line, speed it up by one increment. The goal is a speed where you can pause mid-sentence for emphasis without losing your place.

This setup works consistently for YouTube tutorials, product demo recordings, explainer videos, and course lesson segments — any content where the Mac is sitting on a desk and you want clean eye contact without memorizing the script.

How to record with your iPhone as the camera (Continuity Camera)

The built-in camera on most Macs records 1080p at 30 fps, and it is fixed to the lid at whatever angle your screen happens to sit. Your iPhone's rear camera is a far better camera. With Continuity Camera, macOS lets the Mac use it wirelessly as a webcam, and Teleprompter-Scrolling Scripts can record from it directly. The script stays on your Mac's big screen while the iPhone does the filming.

On Zoom, Teams or FaceTime calls, an iPhone used through Continuity Camera also supports Apple's Center Stage, which pans and zooms to keep you in the frame. For a steady shot while you read, turn off Center Stage on Mac from the Video menu during the call.

Before you start, check Apple's Continuity Camera requirements: an iPhone XR or later, a Mac on macOS Ventura or later, both signed in to the same Apple Account with two-factor authentication, and Wi-Fi and Bluetooth turned on on both devices. The Mac app itself needs macOS 15.6 or later.

1. Mount the iPhone near the top of your display, rear camera facing you. A clip mount on the top edge of the screen keeps the lens as close as possible to where your script will be.
2. Open your script in Camera mode on the Mac. The app starts with the camera macOS itself prefers, so if your iPhone is already mounted and ready, it may be selected automatically.
3. Pick the camera. When more than one camera is available, a camera menu appears next to the resolution and frame rate menus. Choose your iPhone there. USB webcams show up in the same menu.
4. Move the text area right under the lens. Drag the script to the top center of the screen, directly below where the iPhone is mounted, and keep it to two or three lines so your eyes barely move between the words and the camera.
5. Choose resolution and frame rate, then record. The take saves inside the app like any other Camera mode recording.

What quality to expect: over Continuity Camera an iPhone records up to 1080p at 60 fps in this app; pick the frame rate from the menu next to the camera picker. 4K is not available, because macOS caps Continuity Camera video below 4K no matter which iPhone you use, and HDR is not available on Mac at all. If you need 4K or HDR, record on the iPhone itself with the iPhone teleprompter and read the script on its own screen.

Continuity Camera turns an iPhone into a wireless webcam for a Mac. In Teleprompter-Scrolling Scripts, Mac users can pick the iPhone in Camera mode and record up to 1080p at 60 fps while reading the script on the Mac display. 4K and HDR require recording on the iPhone directly.

Teleprompter for Mac livestreams and podcast recording

Livestreaming and podcast recording are where Prompter mode earns its keep for Mac users who are not recording inside the teleprompter app itself.

For OBS or StreamYard livestreams, open the floating window so the script stays on top of OBS. Drag it to a corner of the screen that OBS is not capturing, or use a second monitor if you have one. The script scrolls, you read it, and your stream audience sees only your camera feed. This approach works cleanly for solo streams, co-hosted shows, and product launch streams where you want to hit specific talking points without sounding scripted.

For podcast audio recording — whether you are using GarageBand, Logic, Audacity, or a hardware recorder — Prompter mode functions as a large-format script reader. Keep the full episode outline or word-for-word script on screen, move through sections with the up and down buttons or, in Prompter mode, voice commands in the language you choose in Settings, and record without looking down at printed notes. The result is audio that stays on topic with fewer fumbled transitions and fewer retakes.

For webinars with multiple hosts or co-presenters, each person can run their own instance of the app on their own Mac. There is no shared session or account requirement — each presenter loads their segment of the script locally and runs it independently. Transitions between presenters become cleaner because everyone has their own cue system rather than passing a single set of notes back and forth.

For livestreams and podcasts, the key advantage of Prompter mode is that it adds a professional cue system to any recording setup without touching your camera source or audio chain.

Prompter mode vs Camera mode on Mac: which to use when

The choice between Prompter mode and Camera mode comes down to one question: is the Mac camera the primary recording device for this session?

Use Camera mode when:

• You are recording a YouTube video, course lesson, or demo inside the teleprompter app.
• The camera is the Mac's built-in camera, an iPhone over Continuity Camera, or a USB webcam.
• You want a single-app workflow: write, read, and record in one place.
• The recording is a standalone piece of content, not a live call or stream.

Use Prompter mode when:

• You are on a Zoom, Google Meet, or Teams call and need talking points visible.
• You are livestreaming through OBS, StreamYard, or a similar tool.
• You are recording podcast audio and the camera is not part of the workflow.
• You are filming on a separate camera (DSLR, mirrorless, or a phone running its own camera app).
• You are rehearsing a speech or presentation and do not need to capture the session.

Both modes let you pause and jump back with the up and down buttons; voice commands are available in Prompter mode. Switching between them is a single tap in the app. The practical habit is to start every session by asking which tool owns the camera, then choosing the mode that leaves the camera in the right hands.

If you also record on mobile, the iPhone teleprompter and iPad teleprompter use the same mode logic — Camera mode for in-app recording, Prompter mode when another device or app handles the camera.

Settings that matter for a Mac teleprompter workflow

Mac teleprompter settings are more forgiving than mobile settings because your recording distance and camera position are consistent from session to session. Once you find the right configuration, you rarely need to change it.

Text area position: Top center of the screen, as close to the FaceTime camera dot as practical. For widescreen displays, keep the text area centered horizontally rather than spreading it edge to edge.

Text area height: Two to four lines for Camera mode sessions where eye contact is the priority. A taller reading area for Prompter-only sessions — speeches, podcast prep, webinar outlines — where you want more script visible at once without scrolling as frequently.

Font size: Start at 48pt for a standard 60cm desk distance. Increase by 4pt increments if you find yourself squinting or leaning forward. The right size is one where you can read without conscious effort.

Scroll speed: 2 to 3 lines every 3 to 4 seconds is a practical starting baseline for conversational speech. Adjust down for technical content where the audience needs time to absorb each point. Adjust up for faster-paced content or if you naturally speak quickly.

Text color: White text on a dark semi-transparent background reduces eye strain over long sessions. Avoid pure black backgrounds at full opacity in Camera mode — the overlay becomes distracting in the live preview. A 70 to 80% opacity dark overlay lets the camera preview remain visible beneath the script.

Line spacing: Loose line spacing (1.4 to 1.6x) improves readability for longer scripts. Tight spacing is harder to track when you are also watching the camera preview.

These settings are all adjustable inside Teleprompter-Scrolling Scripts. The fastest way to find your optimal configuration is to record a 90-second test clip, watch the footage once, identify the biggest friction point (squinting, losing your place, rushing), and fix that single setting before re-recording.

Frequently Asked Questions